Cutting mills are the first choice for the size reduction of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products.
The SM 100 is the budget-priced basic model among the RETSCH cutting mills. It is suitable for the size reduction of samples which don’t require extremely high forces. The mill has been specially designed for routine applications. It is easy to operate and can be mounted on a solid table or on the optional base frame.
Voor routinevermalingen
- Feed size < 60 x 80 mm
- Defined final fineness due to bottom sieves with aperture sizes from 0.25 - 20 mm
- Quick and easy cleaning due to smooth surfaces and push-fit rotor
- Gravity outlet for collection vessels of different sizes
- Wide range of accessories including various hoppers, collection systems, rotors and sieves
- Hoogste veiligheidsstandaard
Snijmolen SM 100 Toebehoren voor veilige en efficiënte maalprocessen
The SM 100 can be equipped with different rotors, hoppers and bottom sieves. The mill and accessories, including cutting bars and cutting plates, are also available in versions for heavy-metal-free size reduction.
Rotor Types
A parallel section rotor and a 6-disc rotor are available in stainless and heavy-metal-free steel for optimum adaptation to sample properties.
Trechter Types
The SM 100 can be equipped either with the universal hopper, which is suitable for most samples, or the long-stock hopper which is specially designed for long samples.
Bodemzeven
De bodemzeven zijn van roestvrij staal en zijn beschikbaar met rasp-vormige en vierkante gaten.
Snijmolen SM 100 Typische Monsters
RETSCH snijmolens zijn geschikt voor een breed pakket aan toepassingen. Typische materialen zijn onder meer PET-preforms, aluminiumslakken, diervoeder, botten, kabels, karton, elektronische componenten, voederkorrels, folies, voedsel, leer, bruinkool, materiaalmengsels, non-ferrometalen, papier, farmaceutische producten, plantaardig materiaal, plastic speelgoed , kunststoffen, polymeren, afval van brandstoffen, harsen, rubber, kruiden, stro, textiel, afval, hout, enz.
Bezoek onze toepassingsdatabase om de beste oplossing voor uw monstervoorbereiding of analyse te vinden.
Snijmolen SM 100 Principe
Malen in de Snijmolen SM 100 geneurt door snij- en scheerwerking. Het monster wordt verkleind tussen de messen op de rotor en de stilstaande snijbalken in de wand van de maalkamer.
Bij de 6-schijven rotor, staan trapsgewijze opgestelde maalplaatjes in voor de vermaling met verminderde kans op blokkering.
De messen van de parallelle messen rotor verkleinen het monster zeer krachtig. De verbijftijd van het monster in de maalkamer is kort; zodra het materiaal voldonede fijn is om daar de openingen van de bodemzeef te gaan, verlaten de deeltjes de maalkamer en worden opgevangen in de opvangbak. De rotorsnelheid van 1.500 min-1 waarborgt geleidelijke en snelle vermaling.
Snijmolen SM 100 Technische Gegevens
| Applications: | size reduction by cutting |
|---|---|
| Field of application: | agriculture, biology, chemistry / plastics, engineering / electronics, environment / recycling, food, medicine / pharmaceuticals |
| Feed material: | soft, medium-hard, elastic, fibrous |
| Size reduction principle: | shearing, cutting |
| Max. feed size: | < 60 x 80 mm |
| Final fineness: | 0.25 - 20 mm |
| Speed at 50 Hz (60 Hz): | 1,500 min-1 |
| Rotor peripheral speed: | 9.4 - 11.4 m/s |
| Rotor diameter: | 129.5 mm |
| Types of rotors: | parallel section rotor / 6-disc rotor |
| Types of hoppers: | standard, long stock |
| Material of grinding tools: | stainless steel, steel for heavy-metal free grinding, tungsten carbide |
| Sieve sizes: | trapezoid holes 0.25 / 0.50 / 0.75 / 1.00 / 1.50 mm square holes 2.00 / 4.00 / 6.00 / 8.00 / 10.00 / 20.00 mm |
| Collector systems /capacities: | collecting receptacle 5 l / optional: 30 l collecting unit 0.25 / 0.5 l |
| Drive: | 3-phase motor |
| Drive power: | 1,5 kW |
| Electrical supply data: | different voltages |
| Power connection: | 3-phase |
| Protection code: | IP 54 |
| W x H x D closed: | 582 x 1675 x 700 mm (with base frame and standard hopper) |
| Net weight: | ~ 73 kg without hopper, rotor and base frame |
| Standards: | CE |
Snijmolen SM 100 Downloads
Productinformatieblad SM 100
Expert Guide Milling
Why Size Reduction? A reliable and accurate analysis can only be guaranteed by reproducible sample preparation. The "Art of Milling" describes the process of turning a laboratory sample into a representative part sample with homogeneous analytical fineness.
General Catalogue
Product Overview
The Sample - Customer Magazine No. 43
Reproducible sample preparation with RETSCH laboratory mills
