スイングハンマーミル HM200 製品仕様
| Applications: | coarse and pre-crushing, desagglomeration |
|---|---|
| Field of application: | agriculture, geology / metallurgy, glass / ceramics, coal, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food / feed |
| Feed material: | medium-hard, hard, brittle, tough, fibrous |
| Size reduction principle: | impact, shearing |
| Max. feed size: | < 100 mm |
| Final fineness: | < 0.8 mm |
| Batch size / feed quantity: | up to 30 l depending on collecting receptacle |
| Speed at 50 Hz (60 Hz): | 3000 min-1 (3500 min-1) |
| Throughput: | 1500 kg/h |
| Rotor peripheral speed: | 31.4 m/s |
| Rotor diameter: | 200 mm |
| Types of rotors: | 10 swing hammer |
| Dry grinding: | yes |
| Wet grinding: | no |
| Cryogenic grinding: | no |
| Material of grinding tools: | hardened steel 1.0503 (hammers); steel 1.0330 (sieves) |
| Sieve sizes: | 2 / 3 / 4 / 5 / 6 / 8 / 10 / 15 / 40 mm |
| Dust extraction unit: | yes |
| Process line version: | yes |
| Collector capacity: | 10 l, 30 l, continuous outlet |
| Drive: | 3-phase motor |
| Drive power: | 1.5 kW |
| Electrical supply data: | different voltages |
| Power connection: | 3-phase |
| Protection code: | IP 54 |
| W x H x D closed: | 700 x 1570 x 750 mm |
| Net weight: | ~ 150 kg |
| Standards: | CE |
スイングハンマーミル HM200 資料ダウンロード
General Catalogue
Product data sheet HM 200
ダウンロード
pdf 英語 (~2 MB)
pdf 中国語 (~2 MB)
pdf スペイン語 (~2 MB)
pdf ポーランド語 (~2 MB)
pdf ドイツ語 (~2 MB)
pdf ロシア語 (~2 MB)
pdf トルコ語 (~2 MB)
pdf ルーマニア語 (~2 MB)
pdf ブルガリア語 (~2 MB)
pdf ノルウェー (~2 MB)
pdf 日本語 (~2 MB)
pdf オランダ語 (~2 MB)
pdf フランス語 (~2 MB)
pdf 韓国語 (~2 MB)
pdf ハンガリー語 (~2 MB)
pdf ポルトガル語 (~2 MB)
pdf イタリア語 (~2 MB)
pdf スロヴァキア (~2 MB)
pdf チェコ語 (~2 MB)
Product Overview
How Cyclone Separators Redefine Efficiency and Cleanliness in the Lab
Cyclone separators deliver substantial benefits when used with mills in laboratory settings. While cutting mills or rotor mills are already frequently operated with a cyclone, also jaw crushers and disc mills benefit greatly from this setup. By using a cyclone, it is even possible to combine two mills directly: for example, a two-stage grinding process with a jaw crusher and a disc mill can be completed in a single step.