Moinho de Martelos HM 200 Dados Técnicos
| Applications: | coarse and pre-crushing, desagglomeration |
|---|---|
| Field of application: | agriculture, geology / metallurgy, glass / ceramics, coal, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food / feed |
| Feed material: | medium-hard, hard, brittle, tough, fibrous |
| Size reduction principle: | impact, shearing |
| Max. feed size: | < 100 mm |
| Final fineness: | < 0.8 mm |
| Batch size / feed quantity: | up to 30 l depending on collecting receptacle |
| Speed at 50 Hz (60 Hz): | 3000 min-1 (3500 min-1) |
| Throughput: | 1500 kg/h |
| Rotor peripheral speed: | 31.4 m/s |
| Rotor diameter: | 200 mm |
| Types of rotors: | 10 swing hammer |
| Dry grinding: | yes |
| Wet grinding: | no |
| Cryogenic grinding: | no |
| Material of grinding tools: | hardened steel 1.0503 (hammers); steel 1.0330 (sieves) |
| Sieve sizes: | 2 / 3 / 4 / 5 / 6 / 8 / 10 / 15 / 40 mm |
| Dust extraction unit: | yes |
| Process line version: | yes |
| Collector capacity: | 10 l, 30 l, continuous outlet |
| Drive: | 3-phase motor |
| Drive power: | 1.5 kW |
| Electrical supply data: | different voltages |
| Power connection: | 3-phase |
| Protection code: | IP 54 |
| W x H x D closed: | 700 x 1570 x 750 mm |
| Net weight: | ~ 150 kg |
| Standards: | CE |
Moinho de Martelos HM 200 Downloads
General Catalogue
Product data sheet HM 200
Download
pdf Inglês (~2 MB)
pdf Chinês (~2 MB)
pdf Espanhol (~2 MB)
pdf Polonês (~2 MB)
pdf Alemão (~2 MB)
pdf Russo (~2 MB)
pdf Turco (~2 MB)
pdf Romeno (~2 MB)
pdf Búlgaro (~2 MB)
pdf Norueguês (~2 MB)
pdf Japonês (~2 MB)
pdf Holandês (~2 MB)
pdf Francês (~2 MB)
pdf Coreano (~2 MB)
pdf Húngaro (~2 MB)
pdf Português (~2 MB)
pdf Italiano (~2 MB)
pdf Eslovaco (~2 MB)
pdf Tcheco (~2 MB)
Product Overview
How Cyclone Separators Redefine Efficiency and Cleanliness in the Lab
Cyclone separators deliver substantial benefits when used with mills in laboratory settings. While cutting mills or rotor mills are already frequently operated with a cyclone, also jaw crushers and disc mills benefit greatly from this setup. By using a cyclone, it is even possible to combine two mills directly: for example, a two-stage grinding process with a jaw crusher and a disc mill can be completed in a single step.