Hammer Mill HM 200 기술 데이터
| Applications: | coarse and pre-crushing, desagglomeration |
|---|---|
| Field of application: | agriculture, geology / metallurgy, glass / ceramics, coal, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food / feed |
| Feed material: | medium-hard, hard, brittle, tough, fibrous |
| Size reduction principle: | impact, shearing |
| Max. feed size: | < 100 mm |
| Final fineness: | < 0.8 mm |
| Batch size / feed quantity: | up to 30 l depending on collecting receptacle |
| Speed at 50 Hz (60 Hz): | 3000 min-1 (3500 min-1) |
| Throughput: | 1500 kg/h |
| Rotor peripheral speed: | 31.4 m/s |
| Rotor diameter: | 200 mm |
| Types of rotors: | 10 swing hammer |
| Dry grinding: | yes |
| Wet grinding: | no |
| Cryogenic grinding: | no |
| Material of grinding tools: | hardened steel 1.0503 (hammers); steel 1.0330 (sieves) |
| Sieve sizes: | 2 / 3 / 4 / 5 / 6 / 8 / 10 / 15 / 40 mm |
| Dust extraction unit: | yes |
| Process line version: | yes |
| Collector capacity: | 10 l, 30 l, continuous outlet |
| Drive: | 3-phase motor |
| Drive power: | 1.5 kW |
| Electrical supply data: | different voltages |
| Power connection: | 3-phase |
| Protection code: | IP 54 |
| W x H x D closed: | 700 x 1570 x 750 mm |
| Net weight: | ~ 150 kg |
| Standards: | CE |
Hammer Mill HM 200 제품 정보
General Catalogue
Product data sheet HM 200
다운로드
pdf 영어 (~2 MB)
pdf 중국어 (~2 MB)
pdf 스페인어 (~2 MB)
pdf 폴란드어 (~2 MB)
pdf 독일어 (~2 MB)
pdf 러시아어 (~2 MB)
pdf 터키어 (~2 MB)
pdf 루마니아어 (~2 MB)
pdf 불가리아어 (~2 MB)
pdf 노르웨이어 (~2 MB)
pdf 일본어 (~2 MB)
pdf 독일어 (~2 MB)
pdf 프랑스어 (~2 MB)
pdf 한국어 (~2 MB)
pdf 헝가리어 (~2 MB)
pdf 포르투갈어 (~2 MB)
pdf 이탈리아어 (~2 MB)
pdf 슬로바키아어 (~2 MB)
pdf 체코어 (~2 MB)
Product Overview
How Cyclone Separators Redefine Efficiency and Cleanliness in the Lab
Cyclone separators deliver substantial benefits when used with mills in laboratory settings. While cutting mills or rotor mills are already frequently operated with a cyclone, also jaw crushers and disc mills benefit greatly from this setup. By using a cyclone, it is even possible to combine two mills directly: for example, a two-stage grinding process with a jaw crusher and a disc mill can be completed in a single step.